Crown Paints Kenya · Kenya
CP FLOORTEK- SF Epoxy Screed SL1000/2000 is listed by Crown Paints Kenya (Kenya) under Specialist coatings. Finish: semi matt.
What it is for
Ideal for wide range of floors exposed to extreme wear and tear. Eg (Steel plants, Plant rooms, Warehouses, Factories, Food and Beverage plants, Oil Refineries)
Features listed by the manufacturer
- Enhanced adhesion and self-leveling properties. Remarkable hardness, durability and abrasion. Chemically resistant - good resistance to a wide range of chemicals. High flow characteristics combined with an attractive self-smoothing with matt-semi matt finish. Hygienic - provides a dense, impervious, seamless floor surface which is easily cleaned. Resistance to water staining. Fast application - minimizes downtime. Applied from 1 to 2 mm thickness options.
Specifications
| PaintColorKE category | Specialist coatings |
|---|---|
| Manufacturer’s category | Industrial Paints In the manufacturer’s own words |
| Finish | semi matt |
| Basis | Not published |
| Coverage | Not published |
| Coats | Not published |
| Touch dry | Not published |
| Hard dry | Not published |
| Recoat | Not published |
| Cure | Not published |
| Application | Not published |
| Thinning | Not published |
| Colours | Not published |
| Tintable | Not published |
Values are the manufacturer’s wording, with their units and conditions (temperature, number of coats). Touch dry, hard dry, recoat and cure are different stages. Check the current product data sheet before painting.
Pack sizes
- pre-weighed kits- 4.0 Kgs
- Resin+4.0 Kgs Hardener+
- 16.0 Kgs Aggregate (SL1000/SL2000)
As listed on the product page. Not every pack is available in every colour or market.
Surface preparation (as published)
SURFACE PREPARATION Conduct a Clean, Dry, and Sound (CDS) test on the concrete surface. Perform a moisture test using a moisture meter. Ensure residual moisture does not exceed 4–5%. Relative air humidity (RH): <70% Prepare the surface through scarification, grinding, or shot blasting to achieve a profile of 150–200 microns. | PRIMING: The surfaces require appropriate preparation, prior to the application of CP FLOORTEK Waterborne Epoxy Primer. The primer should be mixed in the given proportions supplied. | MIXING: First mix Component A- Resin part and Component B-Hardener part thoroughly, always add Component C- DM Water part after and keep mixing until uniform within the system. Always mix full pack sizes to avoid incorrect measure of ratio. | APPLICATION: The mixed material should be poured onto the prepared and primed substrate as soon as mixing is complete. It should be spread to the required thickness using a serrated trowel; with care taken not to overwork the resin, spreading evenly and slowly. Immediately after laying, the material should be rolled, using a spiked nylon roller, to remove slight trowel marks, and to assist air release. The rolling should be carried out using a ‘back and forth’ technique along the same path. An overlap of 50% with adjacent paths is recommended. Further light rolling may be required to remove surface imperfections, or for subsequent release of trapped air, but should be prior to the setting of the product. Allow a minimum of 72 hours curing before traffic exposure. The ideal application temperature should be between 23 deg.C to 30 deg.C. It is recommended to do a field trial prior to large scale application.
Source
Official product page · checked October 24, 2026
Product information is the manufacturer’s, read from the official page on that date. PaintColorKE does not sell paint and does not rank products.
Screens and lighting change how colour looks. Confirm a physical sample and the actual product specification before buying paint.