Crown Paints Kenya · Kenya
Crown Damp Protek is listed by Crown Paints Kenya (Kenya) under Waterproofing and Roof paints. Use: exterior.
What it is for
Crown Damp Protek is primarily used on walls, foundations, and basements to address moisture issues from the ground soil/roof ceilings. It is recommended for damp proof purposes to prevent moisture damage on walls, ceilings, building roofs, terraces, parapets, sunshades, podiums, roof slabs, old concrete and on exterior vertical walls. Also, can be applied for internal walls adjacent to bathrooms and kitchens affected by dampness. It's important to remember that damp Protek should not be used as a replacement for addressing the underlying cause of dampness due to continuous leakage.
Features listed by the manufacturer
- Excellent moisture-resistant barrier, prevent rising damp from the soil to wall or the moisture drawn up from ceiling /roof through the walls, patch work in terraces, outstanding adhesion to damp substrate, minimizing the risk of problematic damp. Moisture resistant breathable coating for repairing damp patches on internal walls Easy to apply Single component, comparatively faster drying and allowing for quick work completion, Tough and abrasion resistant Excellent antifungal property Eco friendly– Non-Toxic water-based system Provides long time protection Free from heavy metals and low VOC.
Specifications
| PaintColorKE category | Waterproofing, Roof paints |
|---|---|
| Manufacturer’s category | Waterproofing Products In the manufacturer’s own words |
| Finish | Not published |
| Basis | Not published |
| Coverage | Not published |
| Coats | Not published |
| Touch dry | Not published |
| Hard dry | Not published |
| Recoat | Not published |
| Cure | Not published |
| Application | Not published |
| Thinning | Not published |
| Colours | Not published |
| Tintable | Not published |
Values are the manufacturer’s wording, with their units and conditions (temperature, number of coats). Touch dry, hard dry, recoat and cure are different stages. Check the current product data sheet before painting.
Pack sizes
- 1 Litre
- 4 Litres
- 20 Litres
As listed on the product page. Not every pack is available in every colour or market.
Surface preparation (as published)
Internal Dampness: Ensure plaster surface is thoroughly clean with strong brush. Apply two coats of Damp Protek without any dilution maintaining the spreading rate of 4.6 to 5.0 sq. meters/kg/coat. Apply the 2nd coat at 90° to the first coat. Provide 4-hour re-coating period between the coats. This would ensure correct consumption of material that will deliver a total dft of 170–150 microns. Apply white cement based premium quality putty after the Damp Protek application for surface leveling of interior walls or can be left exposed. There is no need to stand the surface with emery paper Damp Protek coating before application of white cement-based putty. Apply suitable premium internal wall paint for the effaced area after 4 days of the application of white cement putty. The system should cover an area well over and wide of the affected area. This will prevent water from affecting the adjacent areas. | Exterior Vertical and Horizontal surface: The substrate must be checked for soundness and non-structural cracks should be filled with suitable materials. All damaged portions need to be repaired. Ensure application is done on properly prepared surface. Apply two coats of Damp Protek without dilution maintaining the spreading rate of 4.6 to 5.0 sq. meters /kg /coat. Apply the 2nd coat at 90° to the first coat. Provide 4 hours re-coating time interval between the coats. This would ensure correct consumption of material that will deliver a total dft of 170 – 150 microns. Allow the coating to air dry for 4 days. (The spreading rate depends on film thickness applied, surface porosity, imperfections, and wastage during painting). For exterior terrace/ wall surfaces, can provide extra waterproof by applying two coats (undiluted) of Rain Protek, if necessary | Precautions: Do not apply Damp Protek over surface affected with efflorescence. All corners, gaps, joints, protrusions & outlets shall be coated with extra coat. Damp patches at ground level or close to the ground could be caused by rising damp due to high ground water level, a damp proof coating with suitable polymer re-plastering is required on the external wall of the damp and internal walls to protect it from water. In case of severe leakage in pipes or the tile joints of the wall adjoining bathroom/kitchen, have a plumber identify the source and repair it before treating the internal wall. Patch repair on roof & external walls provides temporary relief. Ideal recommendation solution is to go for comprehensive waterproofing on entire surface. Remove masking tape, immediately after application. Keep out of reach of children and eatables.
Source
Official product page · checked October 24, 2026
Product information is the manufacturer’s, read from the official page on that date. PaintColorKE does not sell paint and does not rank products.
Screens and lighting change how colour looks. Confirm a physical sample and the actual product specification before buying paint.