Nippon Paint Singapore · Singapore
Odour-less Ultra 5102 Sealer is listed by Nippon Paint Singapore (Singapore) under Primers, undercoats and sealers and Exterior walls. Finish: Matt.
What it is for
Odour-less Ultra Sealer 5102 is a high quality, water-based, environmentally favorable product with low odour and VOCs (Volatile Organic Compounds) during application and drying. It is formulated for use on interior and exterior masonry surfaces to resist alkaline attack and provide good substrate adhesion for subsequent topcoats.
Specifications
| PaintColorKE category | Primers, undercoats and sealers, Exterior walls |
|---|---|
| Manufacturer’s category | Water Based In the manufacturer’s own words |
| Finish | Matt |
| Basis | Not published |
| Coverage | 10 – 12m² /litre (30 μm DFT/coat), depending on surface texture, substrate porosity and method of application As published, including its basis (per coat or for a system) |
| Coats | Not published |
| Touch dry | 30 minutes at 30°C |
| Hard dry | 1 hour at 30°C |
| Recoat | 2 hours based on normal conditions |
| Cure | Not published |
| Application | Roller or brush |
| Thinning | Not published |
| Colours | Not published |
| Tintable | Not published |
Values are the manufacturer’s wording, with their units and conditions (temperature, number of coats). Touch dry, hard dry, recoat and cure are different stages. Check the current product data sheet before painting.
Pack sizes
Not published.
Surface preparation (as published)
Ensure surface is clean, dry and stable using the following suggested surface treatments: Moisture: There must not be any water residue on the surface of the substrate. Moisture must be <4% (Sovereign moisture master) before application Unstable matter: Remove loose bonding film, dirt, peeling paint, etc by high-pressure water jet wash or mechanical means such as power brush or scraper, whichever is suitable Contaminants: Remove dust and foreign matter by cleaning with damp cloth. Remove oil or grease using solvent or mild detergent. Allow surface to dry Fungus and Algae: Wash the affected area to remove unstable matters and micro-organisms. Apply Anti-Fungus Solution and leave on for at least 2 hours Hairline cracks: Fill cracks with suitable exterior grade water- resistant putty or filler
Source
Official product page · checked October 25, 2026
Product information is the manufacturer’s, read from the official page on that date. PaintColorKE does not sell paint and does not rank products.
Screens and lighting change how colour looks. Confirm a physical sample and the actual product specification before buying paint.