Nippon Paint Singapore · Singapore
Weatherbond AquaGuard is listed by Nippon Paint Singapore (Singapore) under Specialist coatings. Use: Exterior. Finish: Matt.
What it is for
Weatherbond AquaGuard is a water-based acrylic elastomeric coating designed to provide superior water resistance and long-term weather durability. Its elastomeric property enables the coating to bridge and seal hairline cracks, offering effective protection against water ingress and environmental exposure.
Specifications
| PaintColorKE category | Specialist coatings |
|---|---|
| Manufacturer’s category | Exterior Paints In the manufacturer’s own words |
| Finish | Matt |
| Basis | Not published |
| Coverage | Approx. 8m² /litre (60 μm DFT/coat), depending on surface texture, substrate porosity and method of application As published, including its basis (per coat or for a system) |
| Coats | Not published |
| Touch dry | Not published |
| Hard dry | 30 minutes at 30°C |
| Recoat | 2 hours minimum based on normal conditions |
| Cure | Not published |
| Application | Roller or brush |
| Thinning | Not published |
| Colours | Not published |
| Tintable | Not published |
Values are the manufacturer’s wording, with their units and conditions (temperature, number of coats). Touch dry, hard dry, recoat and cure are different stages. Check the current product data sheet before painting.
Pack sizes
Not published.
Surface preparation (as published)
Ensure surface is clean, dry and stable using the following suggested surface treatments: Moisture: The surface must be completely dry and free of any water residue. Moisture must be <4% (Sovereign moisture master / Tramex moisture meter) before application Unstable matter: Remove any loose or unstable material such as peeling paint, rust, mill scale, and dirt by high-pressure water jet wash or mechanical means such as power brush or scraper, whichever is appropriate Contaminants: Clean the surface of any dust, dirt, oil, or grease using a damp cloth and, if necessary, a mild detergent or solvent. Allow the surface to dry completely Fungus and Algae: Wash the affected area to remove unstable materials and microorganisms, and then apply an anti- fungus solution and leave it on for at least 2 hours Hairline cracks: Fill any hairline cracks with a suitable exterior- grade, water-resistant putty or filler
Source
Official product page · checked October 25, 2026
Product information is the manufacturer’s, read from the official page on that date. PaintColorKE does not sell paint and does not rank products.
Screens and lighting change how colour looks. Confirm a physical sample and the actual product specification before buying paint.