Nippon Paint Singapore · Singapore
Vinilex 5170 Wall Sealer is listed by Nippon Paint Singapore (Singapore) under Primers, undercoats and sealers. Finish: Matt.
What it is for
Nippon Paint Vinilex 5170 Oil-Based Wall Sealer contains a superior resin/binder, effective in preventing the degradation of finishing coats by alkaline surfaces. This wall sealer contains a blend of solvents that enables it to penetrate deeply and gives a firm base for subsequent coats
Specifications
| PaintColorKE category | Primers, undercoats and sealers |
|---|---|
| Manufacturer’s category | Solvent Based In the manufacturer’s own words |
| Finish | Matt |
| Basis | Not published |
| Coverage | Approx. 16 m 2 / litre As published, including its basis (per coat or for a system) |
| Coats | Not published |
| Touch dry | 20 minutes at 30°C |
| Hard dry | 2 hours at 30°C |
| Recoat | 5 hours under normal conditions |
| Cure | Not published |
| Application | Roller, brush or spray |
| Thinning | Not published |
| Colours | Not published |
| Tintable | Not published |
Values are the manufacturer’s wording, with their units and conditions (temperature, number of coats). Touch dry, hard dry, recoat and cure are different stages. Check the current product data sheet before painting.
Pack sizes
- 1 Litre
- 5 Litre
As listed on the product page. Not every pack is available in every colour or market.
Surface preparation (as published)
Ensure surface is clean, dry and stable using the following suggested surface treatments: Moisture: There must not be any water residue on the surface of the substrate. Moisture must be <4% (Sovereign moisture master) before application Unstable matter: Remove loose bonding film, dirt, peeling paint, etc by high-pressure water jet wash or mechanical means such as power brush or scraper, whichever is suitable Contaminants: Remove dust and foreign matter by cleaning with damp cloth. Remove oil or grease using solvent or mild detergent. Allow surface to dry Fungus and Algae: Wash the affected area to remove unstable matters and micro-organisms. Apply Anti-Fungus Solution and leave on for at least 2 hours Hairline cracks: Fill cracks with suitable exterior grade water-resistant putty or filler
Source
Official product page · checked October 25, 2026
Product information is the manufacturer’s, read from the official page on that date. PaintColorKE does not sell paint and does not rank products.
Screens and lighting change how colour looks. Confirm a physical sample and the actual product specification before buying paint.