Crown Paints Kenya · Kenya
Crown Vesta Economy Gloss is listed by Crown Paints Kenya (Kenya) under Metal and enamel paints. Use: both.
What it is for
Is an alkyd/ oil-based economy enamel that is ideal for decorating and protecting interior and exterior surfaces. It offers smooth, high gloss washable & stain-resistant finish.
Specifications
| PaintColorKE category | Metal and enamel paints |
|---|---|
| Manufacturer’s category | Decorative/Enamels In the manufacturer’s own words |
| Finish | Not published |
| Basis | Not published |
| Coverage | Not published |
| Coats | Not published |
| Touch dry | Not published |
| Hard dry | Not published |
| Recoat | Not published |
| Cure | Not published |
| Application | Not published |
| Thinning | Not published |
| Colours | Not published |
| Tintable | Not published |
Values are the manufacturer’s wording, with their units and conditions (temperature, number of coats). Touch dry, hard dry, recoat and cure are different stages. Check the current product data sheet before painting.
Pack sizes
- 500ml
- 1L
- 4L
- 20L
As listed on the product page. Not every pack is available in every colour or market.
Surface preparation (as published)
New Plaster or Brickwork: Remove all loose particles and ensure the surface moisture content is below 3% before painting. Apply Crown Plus 3 Masonry Primer or Alkali Resistant Primer, diluted up to 10% by volume with White Spirit. Finish with 2–3 coats of Economy Vesta Gloss, diluted up to 10% by volume with White Spirit. | Previously Emulsion-Painted Surfaces in Sound Condition: Lightly sand down the surface and clean thoroughly to remove dust and dirt. No primer is required if the surface is in good condition unless a drastic colour change is necessary. Apply 2–3 coats of Economy Vesta Gloss, diluted up to 10% by volume with White Spirit. | Previously Oil-Based Enamel Painted Surfaces in Sound Condition: Sand the surface lightly and clean thoroughly. Apply Crown Universal Undercoat, diluted up to 10% by volume with White Spirit. Follow with 2–3 coats of Economy Vesta Gloss, diluted up to 10% by volume with White Spirit. | Loosely Bound, Lime-Washed or Distempered Surfaces: Remove all flaking or loose paint down to a firm base or the original building surface. Apply Crown Penetrating Primer with no dilution to stabilise the surface. Finish with 2–3 coats of Economy Vesta Gloss, diluted up to 10% by volume with White Spirit. | Wood and Boards: Sand the surface along the grain and remove all dust. Apply Crown White Wood Primer, diluted up to 10% by volume with White Spirit. Complete the system with 2–3 coats of Economy Vesta Gloss, diluted up to 10% by volume with White Spirit. | Mild Steel: Degrease the surface using White Spirit or a suitable degreaser. Remove any rust using a Rust Remover, then rinse with clean water until the surface is water break free. Apply Economy Primer Red Oxide or Grey, diluted up to 10% by volume with White Spirit. Finish with 2 coats of Economy Vesta Gloss, diluted up to 10% by volume with White Spirit. | Galvanised Iron or Stainless Steel: Treat the surface by applying a Mordant Solution or a 1-pack Etch Primer to ensure proper adhesion. Follow with Crown Universal Undercoat, diluted up to 10% by volume with White Spirit. Finish with 1–2 coats of Economy Vesta Gloss, diluted up to 10% by volume with White Spirit. | Plastic and Fibreglass: Prepare the surface by applying a 1-pack Etch Primer to promote adhesion. Once dry, apply 1–2 coats of Economy Vesta Gloss, diluted up to 10% by volume with White Spirit.
Source
Official product page · checked October 25, 2026
Product information is the manufacturer’s, read from the official page on that date. PaintColorKE does not sell paint and does not rank products.
Screens and lighting change how colour looks. Confirm a physical sample and the actual product specification before buying paint.