Crown Paints Kenya · Kenya
Crown WB Acrylic Road Marking Paint is listed by Crown Paints Kenya (Kenya) under Specialist coatings.
What it is for
Marking lines and crossings on concrete or asphalt roads, parking lots and airport runways where a fast drying paint with or without the addition of drop-on glass beads is required .
Features listed by the manufacturer
- Water based – environmentally friendly. Fast drying. Excellent water resistance, weathering and durability. Good resistance to solvents and abrasion.
Specifications
| PaintColorKE category | Specialist coatings |
|---|---|
| Manufacturer’s category | Road Marking Paints In the manufacturer’s own words |
| Finish | Not published |
| Basis | water-based |
| Coverage | Depends on film thickness applied, type of texture, surface porosity, imperfections, temperature & wastage during painting. 2 - 4m²/L @175µm WFT as per KEBS specification. Maximum spread rate per coat is obtained at minimum dry film thickness and vice versa. As published, including its basis (per coat or for a system) |
| Coats | Not published |
| Touch dry | Not published |
| Hard dry | Not published |
| Recoat | Not published |
| Cure | Not published |
| Application | By specially designed Spraying Machines or Rollers. Brushing is for small areas only due to speed of |
| Thinning | Not published |
| Colours | Not published |
| Tintable | Not published |
Values are the manufacturer’s wording, with their units and conditions (temperature, number of coats). Touch dry, hard dry, recoat and cure are different stages. Check the current product data sheet before painting.
Pack sizes
- 4 litres
- 20 litres
As listed on the product page. Not every pack is available in every colour or market.
Surface preparation (as published)
Surface Preparation : Before painting, ensure the road surface is clean and free from dust, grease, oil, loose particles, and any other foreign matter. Bitumen surfaces must be cured for at least six weeks prior to painting. Do not apply paint on wet or damp surfaces, or when rain is expected. Always keep the paint can tightly closed to prevent crust build-up. | Directions for Use – Surface Preparation & Paint System : For general road surfaces, start by repairing joint sealings, cracks, cavities, and crevices using appropriate materials. Asphalt surfaces should be cured for a minimum of six weeks. Muddy roads should be cleaned thoroughly using a pressurized water jet and allowed to dry completely. Sweep off dust particles with a broom and remove finer particles using pressurized air. | Paint Application : No primer is required for general road surfaces. Apply one coat of Crown WB Acrylic Roadline Paint at a film thickness of 175 µm. Ensure even coverage and allow adequate drying between coats if multiple applications are needed.
Source
Official product page · checked October 24, 2026
Product information is the manufacturer’s, read from the official page on that date. PaintColorKE does not sell paint and does not rank products.
Screens and lighting change how colour looks. Confirm a physical sample and the actual product specification before buying paint.