Nippon Paint Singapore · Singapore
Aqua Bodelac is listed by Nippon Paint Singapore (Singapore) under Wood finishes and Metal and enamel paints. Finish: High Gloss / Matt.
What it is for
Aqua Bodelac is a water-based modified acrylic gloss enamel wood and metal paint with low Volatile Organic Compound (VOC) and extremely low odour during application and drying
Specifications
| PaintColorKE category | Wood finishes, Metal and enamel paints |
|---|---|
| Manufacturer’s category | Metal Paints, Wood Paints In the manufacturer’s own words |
| Finish | High Gloss / Matt |
| Basis | Not published |
| Coverage | 15-17 m 2 / litre depending on surface texture, substrate porosity and method of application As published, including its basis (per coat or for a system) |
| Coats | Not published |
| Touch dry | 30 minutes at 30°C |
| Hard dry | 2 hours at 30°C |
| Recoat | Minimum 3 hours based on normal conditions |
| Cure | Not published |
| Application | Roller or brush |
| Thinning | Not published |
| Colours | Not published |
| Tintable | Not published |
Values are the manufacturer’s wording, with their units and conditions (temperature, number of coats). Touch dry, hard dry, recoat and cure are different stages. Check the current product data sheet before painting.
Pack sizes
- 1 Litre
- 5 Litre
As listed on the product page. Not every pack is available in every colour or market.
Surface preparation (as published)
Ensure surface is clean, dry and stable using the following suggested surface treatments: Masonry Moisture: There must not be any water residue on the surface of the substrate. Moisture must be <4% (Sovereign moisture master) before application Unstable matter: Remove loose bonding film, dirt, peeling paint, etc by high-pressure water jet wash or mechanical means such as power brush or scraper, whichever is suitable Contaminants: Remove dust and foreign matter by cleaning with damp cloth. Remove oil or grease using solvent or mild detergent. Allow surface to dry Fungus and Algae: Wash the affected area to remove unstable matters and micro-organisms. Apply Anti-Fungus Solution and leave on for at least 2 hours Hairline cracks: Fill cracks with suitable exterior grade water-resistant putty or filler Metal The surface of the substrate must be: Clean/Dry Free for grease/oil Free from rust/foreign matter Free from unstable old film Exposed metal must be primed with: Non-ferrous: Hi-Vinyl 1102 CF Etching Primer Ferrous: Aqua Primer Sealer Undercoat Wood Prepare by sanding to establish a smooth clean surface which is then applied with 1-2 coats of Aqua Primer Sealer Undercoat depending on wood species.
Source
Official product page · checked October 25, 2026
Product information is the manufacturer’s, read from the official page on that date. PaintColorKE does not sell paint and does not rank products.
Screens and lighting change how colour looks. Confirm a physical sample and the actual product specification before buying paint.