Nippon Paint Singapore · Singapore
Aqua WoodStain is listed by Nippon Paint Singapore (Singapore) under Wood finishes. Finish: Sheen.
What it is for
Aqua WoodStain is a water-based coating. This coating protects timber surfaces from harmful UV rays and enhances the natural beauty of wood grains from a long-lasting finish. It offers excellent durability and flexibility, making it ideal for decks and outdoor furniture.
Specifications
| PaintColorKE category | Wood finishes |
|---|---|
| Manufacturer’s category | Wood Paints In the manufacturer’s own words |
| Finish | Sheen |
| Basis | Not published |
| Coverage | Approx. 13-17 m 2 / litre per coat (depending on surface porosity) As published, including its basis (per coat or for a system) |
| Coats | Not published |
| Touch dry | 1 hour at 30°C |
| Hard dry | 1.5 hours at 30°C |
| Recoat | Minimum 4 hours under normal conditions |
| Cure | Not published |
| Application | Brush |
| Thinning | Not published |
| Colours | Not published |
| Tintable | Not published |
Values are the manufacturer’s wording, with their units and conditions (temperature, number of coats). Touch dry, hard dry, recoat and cure are different stages. Check the current product data sheet before painting.
Pack sizes
- 1 Litre
- 5 Litre
As listed on the product page. Not every pack is available in every colour or market.
Surface preparation (as published)
New or unpainted wood surfaces : Surface must be clean, dry and free from grease, paint, wax, dirt and other contaminants before painting Clean off mould, algae, lichen and moss with a wire brush Smooth bare wood surface to be painted using grade #60 or #80 sandpaper, working in the direction of the grain before dusting off If necessary, fill the wood grains with appropriate filler and smooth with sandpaper (grade #150 or #180) Wood must be relatively dry and moisture content should not exceed 20% based on Sovereign Moisture Master before painting. Allow the paint to dry thoroughly before applying next coat If necessary, sand lightly between coats to remove any raised grain before subsequent coats. Previously Painted Wood Surfaces : If the previous paint film is in sound condition and without wax, smoothen it with sandpaper. Clean off and dry For old paint which is in sound condition and without wax, smoothen it with sandpaper. Clean off and dry Otherwise, remove all unstable paint film, dust, oil, wax and other foreign matters Particular care is necessary on previously waxed surfaces and thorough mechanical sanding is recommended to remove all wax. Presence of wax on substrates will affect the drying and adhesion of the paint coating
Source
Official product page · checked October 25, 2026
Product information is the manufacturer’s, read from the official page on that date. PaintColorKE does not sell paint and does not rank products.
Screens and lighting change how colour looks. Confirm a physical sample and the actual product specification before buying paint.