Skip to content
Colour for every idea My projects

Popular

Crown Aluminium Leafing Paint

Crown Aluminium Leafing Paint is a metal paint for inside and outside from Crown Paints Kenya.

  • UseBoth
  • Coverage12–15 m² per litre
  • Pack sizes½ litre, 1 litre, 4 litres
Crown Paints Kenya

What it means for you

  • How far it goes

    Each litre covers about 12–15 m² per coat. A 4 L tin covers about 48–60 m² per coat.

What it is for

Designed for exterior and interior as a general-purpose finish on steel, wood, galvanised iron and masonry for its decorative and protective qualities. Also used for its reflective qualities on steel fuel storage tanks.

Crown Paints Kenya

Features

  • Good water and corrosion resistance, flexibility and heat reflectivity. Good adhesion and opacity.

Specifications

Category
Specialist coatings
Manufacturer’s category
Specialized Coatings
Coverage
12–15 m² per litre per coat
Application
Brush or spray.

Pack sizes

  • ½ litre
  • 1 litre
  • 4 litres
  • 20 litres

Surface preparation

New Ferrous and Steel Surfaces

  1. Degrease with Crown White Spirit or an appropriate degreaser, followed by a fresh water rinse.
  2. Remove all rust using a wire brush to ST2 of the Swedish Standard SIS 055900 - 1967.
  3. Apply 1 coat of Prefab Red Oxide for mild conditions or 1 coat of Zinc Phosphate Primer for harsh environments.
  4. Finish with 1–2 coats of Crown Aluminium Paint, diluted with White Spirit as per the recommended application method.

New Galvanised Iron

  1. Degrease with Crown White Spirit or a suitable degreaser, followed by a fresh water rinse.
  2. Test the surface for “water break free” before priming.
  3. Apply 1 coat of 1-pack Etch Primer or a mordant solution.
  4. Then, use 1 coat of Prefab Red Oxide in mild conditions or 1 coat of Zinc Phosphate Primer in harsh environments.
  5. Finish with 1–2 coats of Crown Aluminium Paint, diluted with White Spirit according to the application method.

Woodwork

  1. Ensure the wood is completely dry.
  2. Punch all nail heads below the surface, sand down to a smooth finish, and dust off.
  3. Treat all knots and pitch streaks with 2 thin coats of Knotting.
  4. Apply 1 coat of Crown White Wood Primer, followed by 1–2 coats of Crown Aluminium Paint, diluted with White Spirit as per the recommended application method.

Masonry

  1. Remove all loose particles and ensure the surface is completely dry.
  2. Apply 1 coat of Plus 3 Masonry or Alkali Resisting Primer, followed by 1–2 coats of Crown Aluminium Paint, diluted with White Spirit as per the application method.

Plan your project

More from Crown Paints Kenya

Crown Jewel Silk

Crown Paints Kenya

Specialist coatings · Silky finish

Crown Paints Kenya brand page