Skip to content
Colour for every idea My projects

Popular

Crown Bituminous Composition for Drinking Water Tanks

Crown Bituminous Composition for Drinking Water Tanks is a solvent-based waterproofing product for use inside from Crown Paints Kenya.

  • Pack sizes1 Lit, 4 Lit, 20 Lit
  • CategorySpecialist coatings
Crown Paints Kenya

What it means for you

  • Solvent-based

    Tough and wipeable, but it smells while it dries and brushes need thinners; keep the room aired.

What it is for

Mainly used for the internal lining of metallic and concrete portable water tanks. Bleeds and discolors when overcoated with oil-based paints.

Crown Paints Kenya

Features

  • Non-toxic. Non-tainting. Odorless. Low permeability to moisture/ Waterproof. Good corrosion resistance and flexibility. Fast drying.

Specifications

Category
Specialist coatings
Manufacturer’s category
Specialized Coatings
Application
Brush or spray.

Pack sizes

  • 1 Lit
  • 4 Lit
  • 20 Lit

Surface preparation

  • Apply withBrush or spray. Spreading Capacity per coat: Depends on film thickness applied, type of texture, surface porosity, imperfections, temperature & wastage during painting

New Ferrous and Steel Surfaces

  1. Degrease the surface using Crown White Spirit or a suitable degreaser, followed by a fresh water rinse.
  2. The surface should then be abrasive blast cleaned to SA 2½ in accordance with Swedish Standard SIS 055900 – 1967.
  3. Alternatively, the surface may be prepared by wire brushing to ST 3 of the same standard.
  4. No separate primer is required as the product is self-priming.
  5. Apply 1–2 coats of Crown Bituminous Composition for Drinking Water Tanks, diluted with Crown White Spirit according to the recommended application method.

New Galvanised Iron and Aluminium Surfaces

  1. Begin by degreasing the surface with Crown White Spirit or an appropriate degreaser, followed by a fresh water rinse.
  2. Prior to priming, test the surface to ensure it is “water break free.” Apply one coat of a 1-pack Etch Primer or Mordant Solution.
  3. No additional primer is required as the coating system is self-priming.
  4. Finish with 1–2 coats of Crown Bituminous Composition for Drinking Water Tanks, diluted with Crown White Spirit in accordance with the recommended application method.

New Plaster or Concrete Surfaces

  1. Ensure the surface moisture content is below 3% and remove all loose particles before coating.
  2. Apply one coat of Crown Bituminous Composition for Drinking Water Tanks, diluted with up to 10% Crown White Spirit as a priming coat.
  3. Follow with 1–2 coats of Crown Bituminous Composition for Drinking Water Tanks, diluted with Crown White Spirit as per the recommended application method.

Plan your project

More from Crown Paints Kenya

Crown Jewel Silk

Crown Paints Kenya

Specialist coatings · Silky finish

Crown Paints Kenya brand page